Closet Core - Paper Sewing Pattern - Sienna Maker Jacket
Sienna is a chic utility jacket inspired by vintage French workwear. Designed for hard-wearing use by makers and artists, it functions as both stylish outerwear and a highly practical layer for use inside the studio.
With a slightly dropped shoulder, Sienna features a crisp notched collar which can be worn buttoned at the neck with an optional snap button. It is unlined and finished with durable seams. Views A & B feature deep hip pockets, a hidden breast pocket and a waist-cinching belt with a D ring closure that can be worn closed, or open by looping the belt in the opposite direction; View A hits at mid-thigh and View B ends at the upper thigh. View C is a short chore jacket with button closure, optional sleeve pockets and a back button placket.
SUGGESTED FABRIC
Durable woven fabrics like denim, twill, canvas and heavyweight linen.
FABRIC REQUIREMENTS (45"/1.14M FABRIC)
View A (Full length jacket)
Sizes 0-20: 0-8 = 3.75yd / 3.5m, 10-14 = 4 yd / 3.75m, 16-20 = 4.5yd / 4.1m
Sizes 14-32: 14-22 = 4.5yd / 4.1m, 24-32 = 4.75 yd / 4.3m
View B (Mid length jacket)
Sizes 0-20: 0-8 = 3.5yd / 3.2m, 10-14= 3.75yd / 3.5m, 16-20 = 4 yd / 3.75m
Sizes 14-32: 14-22 = 4.25yd / 3.9m, 24-32-14 = 4.5 yd / 4.1m
View C (Cropped jacket)
Sizes 0-20: 0-8 = 2.75yd / 2.5m, 10-14 = 3yd / 2.75m, 16-20 = 3.25yd/3m
Sizes 14-32: 14-22 = 3.25yd / 3m, 24-32 = 3.5 yd / 3.2m
FABRIC REQUIREMENTS (58"/1.5M FABRIC)
View A (Full length jacket)
Sizes 0-20: 0-8 = 3yd / 2.75m, 10-14 = 3yd / 3m, 16-20 = 3.5yd / 3.2m
Sizes 14-32: 14-22 = 3.5yd / 3.2m, 24-32 = 3.75 yd / 3.5m
View B (Mid length jacket)
Sizes 0-20: 0-8 = 2.75yd / 2.5m, 10-14 = 3yd / 2.75m, 16-20 = 3.25 yd / 3m
Sizes 14-32: 14-22 = 3.25yd / 3m, 24-32 = 3.5 yd / 3.2m
View C (Cropped jacket)
Sizes 0-20: 0-8 = 2yd / 1.85m, 10-14 = 2.25yd / 2m, 16-20 = 2.5yd / 2m
Sizes 14-32: 14-22 = 2.75yd / 2.5m, 22-32 = 3 yd / 2.75m
ADDITIONAL SUPPLIES
- Lightweight non-stretch fusible interfacing (Sizes 0-20: View A = 1.25yd, View B = 1 yd, View C = .75yd, Sizes 14-32: View A & B = 1.25yds, View C =1 yd )
- Pocket lining (View C = .25yd)
- Polyester thread (Topstitching thread optional)
- View A & B only: D rings or belt slider (1.5" / 38mm)
- View C only: Buttons or snaps - 9 x 5/8"
- Point turner and/or presser for collar
- Marking tool
- Optional: One set of snap buttons for collar
- Optional: Bias tape for finishing seams
- Optional: 5"/13cm twill tape or ribbon for hanging hook loop